Best box mods available
Some vapers wish to go beyond a vaping experience that just ‘simulates’ the look, feel, and effect of real cigarettes. They want a more extreme and technology-driven experience. They want more vapor, more control over their settings, and the ability to get the most out of their flavors and liquids.
If this sounds anything like you, then you might be ready to move on to a box mod.
What is a box mod?
Box mods get their name from their box-like shape. Traditionally, box mods were shaped this way to allow for more electronics to regulate the power from the battery. Box mods, as a general rule, are ‘regulated’ mods, which are different from ‘mechanical mods’. Mechanical mods, on the other hand, consist only of a battery and an atomizer, with no circuit boards or electronics between the two to regulate the current.
Box mods are often regulated to give you even more control over your vaping experience. They might, for example, come with variable wattage or voltage settings, which allow you to completely customize the battery power supplied to the atomizer. Some even come with temperature control modes, which require special coils and allow you to regulate the temperature of the atomizer itself.
Box mods are most well-known for their sophistication – but they also tend to be more difficult to use. Nowadays, they are fully equipped with safety features to keep them from overheating and to protect you from other electronic mishaps – but they still require a basic knowledge of vaping, electronics, and how E-liquid is atomized to create vapor. Because of this, box mods (especially more complicated sub-ohm devices) are usually recommended for more experienced vapers.
People new to the habit may be overwhelmed by the number of settings available, and might need to do a bit of research to get used to the device.
But with that being said, box mods are usually one of the most sought-after types of E-cigs – simply because they tend to offer more power and control over the vapor production for the money than any other type of electronic cigarette. Once a vaper gets used to vaping a vape pen or a cig-a-like, they will most likely eventually turn their eyes to bigger, better, and more sophisticated box mods – relishing the idea of thicker clouds of vapor and more battery power. This is the ‘magic’ that box mods can create – and it’s truly an awesome experience to vape with one!
Are box mods worth the money?
Yes, box mods are certainly worth the money – but keep in mind that they are a bit more advanced. With that being said, no other type of device will give you the kind of vapor and flavor that you’ll be able to get out of a box mod – which is what makes them awesome!
FAQs about box mods
Our most recommended box mods available in the USA
Mods for beginners – 0-50 watts
This small, yet powerful box mod features an ultra-compact size, a fully-enclosed system, an ergonomic shape, and a retail price of just $18.99.
As far as specs go, the Eleaf iNano boasts a 650mAh rechargeable lithium ion battery, a Micro USB port for charging, a maximum output of 10W, and a magnetic, removable tank. It also features a cutaway window so that you can check the tank capacity without difficulty, and ships with a 1.2ohm coil that’s easy to remove and replace.
Dual 1mm airholes help to keep airflow to a maximum, while a 0.8ml tank capacity will keep you filled up and ready to go.
If you’re looking for a compact box mod that’ll still keep you vaping on a serious level, then the iNano might be the perfect ‘starter mod’ for the casual vaper who wants something a bit more sophisticated.
This kit combines a compact design with a stylish, appealing appearance. It comes with a built-in, rechargeable 2000mAh battery, a maximum output of 14W, and enough built in safety features to keep it from overheating or overcharging during use.
It comes with the Prism T22 Tank, which features a 1.5ohm coil and a Pyrex glass tank.
Other features include a micro USB charging port, 510 threaded connections, a 1.2ohm minimum resistance, 100% organic cotton wick material, and a Delrin drip tip.
Priced at just $32.95, the Innokin Endura T22 is certainly a competitive kit in its type and price range.
This compact box mod boasts 30 watts of power and a minimum resistance of 0.4ohms – making it a sub-ohm-ready device that’s more than capable of producing both ample clouds and an awesome taste.
It comes with a 2200mAh built-in battery, an adjustable wattage that ranges from 5 to 30Watts, adjustable voltage ranging from 2.0 to 8.0V, an incremental OLED screen, and voltage protection.
The mod itself is Micro USB rechargeable and comes with 510 threading, but you’ll need to either purchase a bundle or collect your own charger and tank to go with it – as the mod by itself doesn’t come with either.
Priced at $29.95, this is definitely an affordable, yet powerful mod in our beginner-level box mod category – and it certainly deserves a place in our ‘best box mod’ list for US customers.
Mid-range, Intermediate Mods: 50-100W
The first mod on our mid-range list for US vapers is the Apollo Reliant 60W – and it certainly deserves the spot! It’s priced at $74.95, but you’ll need to buy a tank and a charger to go with it, as this price just includes the battery/mod itself – which is still a heck of a deal. It features 3 different firing modes, including temperature control, wattage, and mechanical.
The TC mode allows you to choose from temperatures of 200°F up to 600°F, and provides a maximum power output of 60W. It also sports a super-portable design, USB pass-through charging, and the ability to remove the 18650 (which is not included with the mod) battery for external charging as well, which is really nice.
Also featuring a 5-click lock system, compatibility with atomizers as low as 0.06ohms, and a variable wattage range of 5 to 60 Watts, this box mod is priced for affordability while delivering incredible value for the cost.
As an intermediate-level box mod that also comes with a quality tank (the iSub Apex), the Innokin Coolfire 4 delivers a powerful combination of style, efficiency, and affordability.
Priced at just $63.95, this box mod features a 3ml tank capacity, a no-spill coil swap system, dual-adjustable airflow control, and a top-fill refill design that makes topping it off with new E-liquid a piece of cake. The kit comes with the CoolFire 4, 1 battery, the iSub Apex Tank, an extra coil, 8 spare o-ring seals, and a micro USB cable.
As far as specs go, the Cool Fire 4 will vape at a resistance of 0.5ohms with the included iSub tank – though it’s capable of resistances as low as 0.1 with the right coils. The battery that comes with the mod is a huge 3300mAh powerhouse, and the mod itself is equipped with pass-through charging, a battery level indicator, an OLED screen, and a micro USB charging port.
If you want to get into sub ohm vaping with a combo kit that will quite literally produce massive clouds of vapor, then the CoolFire 4 might be the perfect kit to get you started.
The Eleaf iStick 60W is the ‘big brother’ of the smaller Eleaf box mods – and in this full starter kit, you’ll find that it also offers a ton of value for the money. This version is equipped with a temperature control mode, which is compatible with both Nickel 200 and Titanium coils. The mod itself has also changed a bit with this newer design. It has been outfitted with more ‘curves’ for a more ergonomic look and feel. This gives it a more contoured appearance while reducing hand fatigue during use.
As far as specs go, this kit ships with 1 Eleaf Melo 2 Sub-ohm tank, the Eleaf iStick itself, 1 Micro USB charging cable, and a user manual. The one thing it doesn’t come with is the required 18650 battery, so you’ll need to pick one of those up if you don’t already have one. The mod also boasts a stainless steel firing button, an OLED display screen, an output wattage of 1 to 60 Watts, resistances ranging from 0.15 to 3.5 ohms, and a stainless steel construction with a Pyrex glass tank.
If you’re in the market for an affordable sub ohm kit that’ll take you to the next level, then the Eleaf iStick kit (priced at $53.95) will certainly get you started on the right foot!
High-Range, Advanced Mods: 100-200W
The X Cube 2, made by SMOK, boasts a beautiful exterior while hiding raw power underneath the surface. This box mod looks about as slick and sleek as it gets – but don’t underestimate the incredible 160W of power that this E-cig can generate.
It’s Bluetooth 4.0 compatible, boasts a temperature control mode, utilizes two 18650 batteries (sold separately) for ample power and battery life, and shows you what’s going on beneath the exterior with an intelligent, impressive OLED display screen that’ll leave you breathless.
This mod is capable of handling resistances ranging from 0.08 ohms to 3.0 ohms, can deliver variable wattage ranging from 6 to 160W, and can vary the voltage output to anywhere between 0.35 and 8V. You can set the TC mode to anywhere from 200 – 600°F, and can connect most tanks with the handy 510, spring-loaded connector.
Priced at $59.95, you’ll be hard pressed to find this much power and quality at a more affordable price.
If you’re looking for straight-up power in a vaping device, then the Koopor Plus will doubtlessly be a contender in your search. This mod is powered by two 18650 batteries (sold separately), and is equipped with a ton of features to help you make the most of their power.
The output range on this box mod is an impressive 6 to 200W, and the voltage can be set to anywhere between 0.35 and 8V.
The Temperature Control mode is state of the art, and can supply temperatures of anywhere from 200 to 600 degrees Fahrenheit. As far as resistance ranges are concerned, the Kooper can utilize 0.10 to 3.0ohm coils in wattage mode, or 0.08 to 3.0ohm coils in temperature control mode – making it a dynamic and fully-functional box mod that will literally push your tank and your vaping habit to the limits.
If you’re looking for something impressive that’ll also provide quality to spare, then the SMOKtech Koopor Plus might be a mod for you to look at.
Priced at $59.99, the Reuleaux RX200 mod utilizes three 18650 batteries (not included) to power itself. Featuring a wattage range of 1 to 200W, equipped with a temperature control mode, and decked out with a 0.91 inch OLED Screen, this box mod certainly has the power and the features to take your vaping experience to a higher level.
This box mod uses a Joyetech chip within the unit to give you access to a full range of features. It utilizes unique heat dissipation, a 510 spring-loaded stainless-steel thread system, reverse polarity for batteries (which helps to prevent damage from batteries being inserted correctly), and a magnetic battery cover to make changing out the lithium ions as easy as possible.
If you want incredible, raw power and proven performance, then this might be a box mod that you should take a look at.
The Tesla Wood combines the elegance and style of old-world technology with the efficiency and power of modern electronics. If you’re a vaper who likes style and desires something a bit ‘unique’, then you should probably consider taking a look at this old-fashioned, yet sophisticated device.
Priced at an impressively affordable $84.95, this wood-cased box mod boasts some pretty new-world technology. In temperature control mode, this mod can reach temperatures ranging from 200 to 600F, and it can handle wattages ranging from 7W to 160W.
It’s also sub-ohm capable, and is built to handle resistances of 0.15-3.5ohms with a regular atomizer, or 0.08-1.0ohms with TC Nickel 200 coils. It also comes with a beautiful OLED screen, sports easily-removable cover plates, and runs on 2 18650 batteries (which are sold separately).